Rentals
By Maureen M. Upchurch
 The Xtreme XR7038 telehandler is the largest telehandler in North America. It has the ability to lift 70,000 pounds and has a 38-foot lift height, a 22-foot forward reach, and a 300-hp Tier IVi engine. |
 The XR1270 roller boom telehandler has a lift capacity of 12,000 pounds, a lift height of 70 feet, and a forward reach of 53 feet, 8 inches. |
Mason contractors of every size in every location are eventually saddled with the prospect of equipment purchases. In some cases, equipment necessary for the completion of a job will break down, be rendered obsolete, or be utilized across town or across the region on another project. This challenges masons with a very real issue: How are my dollars best spent – by purchasing new equipment or by renting?
When Rental Makes CentsBy Sean O’Halloran |
|
 Renting may be a sensible choice over purchasing when it comes to the world of heavy equipment for a number of reasons. But, do the same rules apply regarding concrete and masonry equipment, which – generally speaking – have a smaller price tag? The short answer is “yes,” in many cases.
Certain organizations can greatly benefit in the long run from leasing or renting equipment, and there are other organizations that may not see as much of a positive impact to their bottom lines from these options. Contractors who have multiple jobs going on at the same time will typically own a fleet of equipment, including trowels, mixers, screeds and vibrators at their disposal. For these organizations, typically, some creative logistics allow them to move equipment within their fleet from one job to another without having to enter into a rental agreement with their equipment partners. Smaller or mid-size contractors who prefer to keep a lean fleet and avoid investing in storage and maintenance of the equipment can greatly benefit from a proactive rental program. They can actively monitor projects in the pipeline, and work with a rental provider to meet their individual project needs. Maintenance, service and support Storage Ready to rent Each case is unique There’s no single correct answer, and each organization is ultimately tasked with deciding what is right for that business, based on the equipment’s potential frequency of use, the length of the project, and whether the personnel to properly maintain and store the equipment is in place. Sean O’Halloran is marketing manager at The Toro Company. To learn more about Toro’s masonry and concrete products available for rental, visit www.toro.com/rental. |
The decision to make the more significant investment of buying, or the smaller, incremental investment of renting, relies on various factors. For most, this is a business-specific decision. Scott Phillips, director of marketing for The Marshalltown Co., a family-owned manufacturer of construction equipment in Marshalltown, Iowa, says that “a business has to evaluate the long-term per-hour cost of owning, and convenience, maintenance, acquisition, cost, resale value and storage.”
Terry Hagy, president of RentalMax, the largest independent rental company in Chicago, puts it a different way: “Contractors talk about a 65 percent utilization factor; if the item won’t be used 65 percent of the time, firms are probably better off renting.”
In all, the buy versus rent question is not answered the same way by everyone and can be argued both ways. What is the long-term cost of owning versus the convenience of renting? How close is the rental yard to the jobsite? Is the time spent picking up and returning smaller pieces of equipment worth the amount of time you are away from the jobsite, not working?
While the question of renting vs buying is an economic decision, masons must consider practical factors. What are the logistics of the various projects in which your firm is involved? Do you have two projects locally and three more out of state?
According to Chris Ellis, project manager of Koontz Masonry, the use of rental equipment allows him to address his jobsite needs beyond his Lexington, N.C., backyard. Koontz is currently working on Freeman Hall at Clemson University in Clemson, S.C., among other projects. While this job is significant for Koontz, it is more than three hours in travel time from the firm’s headquarters.
“We have to bear not only the location of the project in mind when we decide to rent or use our own equipment, but we have to factor in the duration of the project and the availability of our own equipment,” says Ellis of his family-owned and operated company. The Clemson University project began in October 2014 and was completed last month. Could Koontz and its workload support the use of their own equipment on one job in a distant location for eight months? When Ellis factored in the costs associated with hauling the equipment and maintaining it at a remote location, serious questions were presented. In this case, Ellis says, “It just makes sense to rent.”
Heavy equipment manufacturer Xtreme Manufacturing Inc. of Las Vegas, Nev., echoes the thoughts of Ellis. Don Ahern, CEO of Ahern Rentals, owner of Snorkel and operating manager/president of Xtreme, says the length of time the equipment will be required on a jobsite is a leading factor on the decision to rent versus buy.
The Xtreme telehandler XR5919 is designed for maneuvering in tight spaces, parking garages, and/or crowded jobsites. It is useful as a support machine for jobsites with a larger forklift or telehandler on site, and has a 5,900-pound capacity, a 19-foot lift height, an 11-foot forward reach, and a 61-hp Tier IV Final engine.
“Rental provides a good option for masons who require the equipment for a short period of time or for those who regularly change the mix of equipment on site,” says Ahern. “Masons who use the same type of equipment on long-term jobs or across multiple projects may benefit from purchasing equipment outright.”
Marshalltown’s Phillips encourages masons to self-assess when making decisions on equipment. Know your size, and know the direction in which you want your business to grow. “If you are a mid-tier firm that breaks a few bags of concrete per week, you probably don’t need to buy a concrete mixer,” he says. “If you get a large job, like a strip mall, then progressively another and another, you may want to consider buying.”
While manufacturers, like the 125-year-old Marshalltown, do not rent to masons directly, they do sell their products to the rental outlets. And, repeatedly, Phillips sees “our clients renting the same piece of equipment to the same mason, over and over. Eventually those masons will buy that equipment.”
This not only allows the mason contractor to test the product to determine if he likes it or needs it before he buys, it also allows the rental outlet to determine if the $10,000 mixer is a good investment.
Where to rent
So where would a mason contractor like Koontz rent the equipment needed to complete a project? In order to find a rental outlet, one can quickly search the internet to find convenient locations from local/regional purveyors, big box retail chains, national rental companies and more. But how do you choose the right facility for your business?
Shown is a Marshalltown mixer in use.
Many mason contractors select rental outlets based on criteria defined by their business needs and philosophies. Whether it be cost, quality of equipment, availability of equipment or maintenance of equipment, etc., soliciting several rental quotes at the outset proves valuable.
“Our rental choice is based primarily on price,” says Ellis. “We generally use the same rental company, because they give us the best price. But I am not loyal to them, I am loyal to the price.”
Hagy of RentalMax sees maintenance of equipment as another factor in how mason contractors select a rental outlet. “Masons choose their rental company by how they maintain their product. When the equipment breaks down, the rental outlet has to respond. If the equipment is not maintained, there is no product to rent.”
What to rent
Which equipment is rented most frequently by masons? There is vast availability in rental equipment – literally thousands of products – from troughs to telehandlers and everything in between.
Shown is the XR1270 roller boom telehandler in action.
While Koontz rents only scaffolding and forklifts, RentalMax sees a diverse cross-section of products contracted in its eight Chicago-area locations. Hagy notes the rental of skid steers and excavators for site preparation as well as a hammer attachment to maximize breaking power in demolition projects. Mason contractors in the northern states will rent ground heaters to allow them the ability to pour and cure concrete 12 months per year. Coring drills and concrete grinders are other top-renting items.
With manufacturers such as Marshalltown, a significant amount of products that they manufacture in their Iowa or Arkansas locations are sold to rental outlets. These products range in price from $50 to $10,000. Xtreme produces 16 models of rough terrain forklifts, or telehandlers, ranging in price by lift capacity and reach. All of these products, valued from $87,700 to more than $870,000, are rentable. About 50 percent of those manufactured are sold to rental outlets.
When considering renting versus buying, mason contractors must be sure to be true to their businesses’ current statuses and plans for the future. While rental fees can add line items to a budget, so can fees for storage, maintenance and hauling of equipment. Ask questions that are pertinent to the core of your business, from price to utilization to maintenance to logistics and more. Get several quotes to determine which outlet is the best fit for the wants and needs of your business. Thoughtful consideration of questions like these will save time, money and aggravation.
Based in Georgia, Maureen M. Upchurch is a freelance writer with 15 years of experience in the construction industry.
Ask the Expert: Hydro-Mobile’s Kevin O’Shea |
| Masonry recently sat down with Hydro-Mobile’s director of safety and training, Kevin O’Shea, to learn more about how a globally renowned company approaches the area of equipment rental. Following is what he had to say.
Masonry: Which of your products do you consider rentable? Masonry: How do renting and leasing differ, and what are the pros and cons of each? Purchase and lease options normally apply to those companies who have, or who can, foresee a high utilization requirement for mast climbers. Leasing equipment is a viable option for many, but one important consideration in leasing is the residual value of the equipment after the prime period of the lease. For example, you might finance 75 percent of the equipment value over five or seven years. At the end of this period, you will be left with an asset that has a market value. Is your residual asset value realistic to that market value? Masonry: Any advice on renting versus leasing versus buying? Buying or leasing is a financial decision which is, on many occasions, about the needs and profile of the potential owner. Whether buying or leasing, it’s worth remembering that you now have enhanced responsibilities toward duty of care of the equipment. Working with the manufacturer to properly address those requirements is vital. Masonry: When renting a mast climbing work platform to a mason, how is the mason’s ability to safely operate it gauged or measured? Manufacturer certification is evidence of appropriate training. Masonry: What signs should a mason look for to ensure that rental equipment has been well maintained? |
Related Posts
- 42
Table of Contents August 2013 Volume 52, Number 8 FEATURES Manufactured Stone Industry Snapshot A current view of the manufactured stone industry, courtesy of two industry experts Mast Climbing Work Platforms Equipment owners and rental companies must create safe working conditions as they push to mobilize. Workforce Development Rebuilding a masonry workforce and apprenticeship program…
- 41
Table of Contents November 2008 Volume 47, Number 11 FEATURES School Days Education and training for masonry professionals The Skinny on Scaffolding New scaffolding products offer time and money savings, and safety. Hot Trends in Fireplaces Fireplaces and chimneys provide opportunities for growth and profit. 2009 MCAA Convention This year's convention will be a mix…
- 40
March 2015 Which mixer is right for your crew on your jobsite? Here’s a place to start. By Jennifer Morrell Most mason contractors will tell you that once they find a mixer, pump and/or delivery system with which they are comfortable and happy, then chances are, they’ll be loyal to that brand. This is a…
- 39Classifieds and Professional Services Advertisements Categories: Equipment: Used (updated 3/1) Products (updated 3/1) Auctions Businesses for Sale Education and Information Employment Equipment: Parts Equipment: Reconditioned Equipment: Wanted Material Organizations Professional Services (updated 3/1) Sales/Distribution Opportunities Seeking Employment Services Interested in posting a classified or professional services advertisement? Click here for more information.
- 38
February 2014 Software BIM-M: A Work in Progress IU Global and International Studies Building Graphics courtesy of Tradesmen Software Inc. By David Biggs, P.E., S.E. It has been two years since the idea of Building Information Modeling – Masonry (BIM-M) was conceived, and what it means is still evolving. For many, BIM is 3D modeling…
The post When and Why to Rent appeared first on Masonry Magazine.
It’s a very good artical and good creation and good information thanks for sharing .
ReplyDeleteTelehandlers Pakistan