October 2015
Happy Fall, Y’all
Jennifer Morrell
Editor
jmorrell@lionhrtpub.com
As we usher in fall, our first thoughts go to the staples of the season: football games; leaves turning shades of red, orange and brown; and – oh yes – winterizing your jobsite.
Winterizing your jobsite and equipment is no joke. Faulty, frozen equipment can be dangerous, and you don’t want to risk having your jobsite tools and equipment ruined by the elements.
Masonry Magazine offers the following advice for keeping your work area and equipment operational and safe in winter. You can read the entire article at http://www.masonrymagazine.com/1-03/winter.html.
One piece of equipment you will be using in cold weather is the mortar mixer. Follow normal maintenance procedures throughout the year, and keep your mixer clean and properly maintained. Consider spraying your mixer prior to every use with concrete form oil or any type of environmentally safe oil, to help prevent mortar buildup and to allow accumulated ice to dislodge easier.
During freezing or near-freezing temperatures, change engine oil for a lower viscosity or a lower multiple viscosity, such as 5W-20. Store equipment inside a warm building when not in use. Under extreme conditions, start the engine and allow it to idle, while the equipment is being transported to the jobsite. Warm up all hydraulic equipment before use to prevent damage to the controls and lines, as cold hydro oil is thick and will resist a system.
Frozen precipitation brings its own brand of safety considerations for drivers. First and foremost, watch your traction. When driving the forklift on an ice-covered hill or road, assure appropriate traction exists for steering and stopping. And, remember the “three-point” rule: One foot and both hands must always be on the grips and steps.
As the temperatures drop, the need for safety heightens. Bear this in mind in all that you do on the jobsite. We wish you a happy and safe fall.
Related Posts
- 34
July 2012 New Technologies Seeing Is Understanding People with an interest in masonry often need help understanding new technologies, old traditions and why the architect even drew such a thing. The MasonCam and a new video series can bring muchneeded clarity to these situations. By Steve Fechino All information shared…
- 33
Maxwell Technologies Inc. San Diego Maxwell Technologies Inc.’s 24-volt ultracapacitor-based Engine Start Module (ESM) is ideal for improving equipment uptime and power reliability in buses and industrial vehicles, such as cranes, backhoes, bulldozers, graders, pavers, off-road trucks, portable compressors and others with diesel engines. The 24-volt ESM enables vehicles to…
- 33
September 2011 Mixers, Pumps and Delivery Systems Product Profile: BMI’s Silo System Masonry examines the uses and benefits of a silo system for mason contractors. Imagine: no more enormous dust plumes and empty cement bags on your jobsite, and no more large piles of hardened material and empty pallets lying…
- 33
September 2013 Mixers, Pumps and Delivery Systems Mortar and Grout Delivery An overview of equipment features that allow you to meet the challenges of proper mortar and grout delivery By Todd Ferguson On any masonry jobsite, contractors are faced with decisions on how to best manage their material production and…
- 32
Table of Contents October 2008 Volume 47, Number 10 FEATURES Green Building: Initiating the Initiative in Your Business Everyone is going green. Find out how being green can affect your operation, and what it means to your company to comply with this way of doing business. 2009 MCAA Convention The…
The post October 2015: From The Editor appeared first on Masonry Magazine.
No comments:
Post a Comment